Anytime Heating, Cooling and Plumbing offers Hydro Jetting drain and sewer clearing services for both Residential and Commercial locations.
When you get a clogged sewer or plumbing drain, a plumber will often use some type of auger or ‘snake’. This is a metal lead ran down the clogged plumbing pipe. Sometimes this can actually make the problem worse because there can be pieces of metal from the drainpipe that comes off making the clog worse or damaging your pipe.
Hydro Jetting is a process where concentrated and very high-pressurized water [Hydro](up to 4,000 psi) is used to safely blast through blockages in a sewer or drain pipe. As water strikes the inside of the pipe the blockage is safely removed. Reverse streaming water jets also can be used to clear the blockage and clean the pipe. Hydro Jetting can remove debris instantly without disruption or backflow and can also clear a blocked drain without having to dig up pipes.
Anytime Heating, Cooling and Plumbing will use a video camera fed down into your drain or sewer pipe to investigate the blockage and determine the best use and application of the Hydro Jet equipment.
If your home or business is exposed to potentially drain and sewer clogging issues such as hair build-up, grease blockage, tree roots, food oil, cooking waste, or food materials you can schedule regular preventive drain cleaning services with Hydro Jet technology.
See our frequently asked questions below regarding Hydro Jetting.
Q: What is Hydro Jetting?
A: Hydro Jetting is equipment that uses high-pressure water to remove a clogged or blocked sewer or plumbing drain.
Q: Is Hydro Jet technology safe?
A: When performed by a qualified technician, Hydro Jetting will not cause any damage to your plumbing pipes.
Q: Is Hydro Jetting ‘Eco – Friendly’?
A: No chemicals are needed only water is used so Hydro Jetting is an eco friendly solution to clear a clogged drain.
Q: Does Hydro Jetting work on tree roots?
A: Yes, Hydro Jetting can clean and prevent tree roots from clogging a drain.
Q: How long does it take to Hydro Jet a sewer or drain line?
A: It depends on how severe your clog is, how accessible the equipment can be to the location of the drain, how long your sewer pipe is and other factors. Generally speaking, it can take 1 – 3 hours to Hydro Jet a clogged sewer line.
Q: Do I have to dig up a clogged sewer or plumbing drain?
A: With Hydro-Jet services, in most cases the blockage can be cleared without the need to dig up sewer or plumbing drain pipes. However, if your sewer pipe has collapsed then you would likely need to replace the pipe.
Q: How much does it cost to Hydro Jet a blocked sewer line?
A: The cost will depend on where you are located, the severity of the clog, and where the actual clog is located inside the sewer/drain pipe. This type of service is not a flat fee rate. The range on an average could be $250-$500. In more extreme situations the cost could reach $1,000.
Q: Is Hydro Jet worth the cost?
A: As a professional licensed plumbing company, we see the value in Hydro jetting because there is less risk of damage to your sewer and drain pipes. Also, unlike ‘snaking’ it doesn’t just punch a hole through the blockage but it cleans the pipes, and it also is eco friendly.
Q: How long does Hydro Jet cleaning last?
A: If you do not expose the drain to elements know to clog them, Hydro Jet can last for many, many years. Unlike just using a ‘snake’ to punch a hole through a blockage, hydro jetting actually removes and cleans the blockage and pipes. Also, using a store bought drain cleaner solution can damage your pipes and may only last a week or less.
Contact Anytime Heating, Cooling and Plumbing for an evaluation on your clogged drain or sewer pipe and to see if Hydro Jetting is a good solution. We can also schedule preventative maintenance for your plumbing and sewer situations that are more exposed and higher risk for clogged drains.